Containers

Shipping container security with VaultX

An inside lock for ISO containers that wait on rail sidings, at terminals and in yards, with nothing hanging on the doors.

VaultX · Updated · 5 min read

Key takeaways

  • VaultX mounts inside the container on its interior lashing rings and holds the doors shut with about 1.2 metric tons (2,600 lb) of force.
  • It fits all ISO shipping containers, including 20, 40 and 45 foot boxes and high cubes, whether the box rides a train, sits at a port or waits in a yard.
  • Your ISO 17712 seal still goes on the outside of the door. VaultX works alongside it.
  • It is not a twist lock, a tracker or a chassis lock. It keeps the doors shut, and that is its whole job.
On this page

The short answer: VaultX is a U.S. patent-approved lock that goes inside a shipping container, or conex box, and holds the doors shut from within. There is no padlock, lockbox or bar on the outside, so a box with VaultX looks like every other box in the row. This page covers how it fits a container, where it earns its keep, and what you still need next to it.

Can you spot the lock?#

Shipping container doors secured with VaultX. The lock is inside, so nothing is clamped across the doors.
A container secured with VaultX. The lock is on the inside of these doors.

That container is locked. From the yard it looks like any other box. Put a red bar lock across the same doors and the message flips: there is something in here worth protecting, and this is the part to cut.

Outside hardware still has a place, and our container lock types comparison goes through padlocks, lockboxes, bolt seals and internal locks one by one. This page is about the internal option on a working freight container.

Why is a container harder to protect than a trailer?#

Two reasons. A container waits a lot, and it changes hands a lot.

A loaded box can sit on a rail siding, in a terminal stack, on a chassis in a drop lot or in a customer's yard for days. Overhaul's Q2 2026 data shows where theft happens: warehouses and distribution centers were 37% of thefts, truck stops and fuel stations 15%, and rail locations 11%. Pilferage, where someone gets into a parked unit and takes part of the load, was 46% of reported incidents.

Then there are the hands. A shipper loads and seals the box, a drayage driver pulls it, a railroad or ocean carrier moves it, and a receiver opens it, sometimes in another country. Nobody watches the doors for the whole trip. A padlock adds one more problem: the key has to travel with the box or get sent ahead to whoever opens it. With VaultX the release happens with a wireless remote or the phone app, so there is no key to mail.

How does VaultX mount in a container?#

It uses hardware the container already has. Here is the sequence on a typical move.

  1. Mount at origin. The unit anchors to the container's interior lashing rings, just inside the doors. Most installs take under five minutes with minimal modification to the container.
  2. Close and lock. Shut the doors and lock VaultX with the remote or the Bluetooth app. It draws the doors shut from within and holds them, rated at about 1.2 metric tons (2,600 lb) in container mode.
  3. Seal it. Put your ISO 17712 seal on the outside of the door, where your shipper or program wants it. VaultX sits inside, so the seal spot stays free.
  4. Release at destination. The person holding the remote or app opens it at the container. The app logs who opened the lock and when.
  5. Reuse. Take the unit out, recharge it and put it on the next box. Nothing gets cut off and thrown away.

The full technical detail stays private on purpose. VaultX walks qualified buyers through it in a live demo on a real container.

Where does VaultX fit on a container move?#

  • Rail. This is where VaultX was proven. It logged more than 1,000 runs on a high theft rail lane in a year long field trial, and to date no VaultX lock has been defeated or broken into.
  • Port and terminal dwell. A box waiting for a vessel, a train or a dray sits with the same two doors facing out the whole time, and nobody is assigned to watch them.
  • Yards and drop lots. Pilferage happens to parked units, and a loaded box on a chassis over a weekend is a parked unit with nobody watching.
  • Cross border moves. VaultX is based in South Texas, on the U.S. and Mexico border. If customs needs the doors open, the driver unlocks VaultX with the remote or the app, and the app records it.
  • Reefer containers. VaultX is built to work in cold chain conditions. Our reefer and cold chain guide explains why an open door costs more on temperature controlled freight.

What does VaultX not do on a container?#

Buyers sometimes expect a container lock to cover more than the doors. Here is where VaultX stops.

  • It is not a twist lock or corner lock. It does nothing for stacking, or for fastening a box to a chassis, a ship or the ground.
  • It does not keep the container from being pulled away. If a thief hooks up the chassis and drives off, use a king pin or gladhand lock on the chassis for that. The doors are still locked wherever the box ends up, so the thief still has to get through them.
  • It does not replace the seal. A seal shows a door was opened. VaultX keeps it from opening. Keep the seal wherever a shipper, program or insurer requires one.
  • It is not a live tracker. The app records each lock and release. It does not show where the box is in between, and VaultX cannot be opened from a control center today. Keep your tracker on high value boxes.
  • It does not stop a fictitious pickup. If the box is released to a fake carrier, the lock leaves with it. Verify every carrier before release.

Frequently asked questions#

Does VaultX fit high cube and 45 foot containers?

Yes. VaultX fits all ISO shipping containers: 20, 40 and 45 foot boxes and high cubes, on rail, at port and in yards. It anchors to the container's interior lashing rings.

How long does the battery last?

About 30 days per battery. VaultX holds up to 3 batteries, so a full set covers at least 90 days, which is enough for most long dwells on a siding or in a yard.

How much force does VaultX hold on a container?

About 1.2 metric tons, or roughly 2,600 lb, in container mode.

Do I still need a bolt seal with VaultX?

If your shipper, customs program or insurer requires one, yes. The seal goes on the outside of the door and VaultX sits inside, so the two do not get in each other's way. The seal proves the doors stayed shut. VaultX keeps them shut.

Who opens the container at the other end?

Whoever holds the wireless remote or the phone app. No key has to travel with the box. The app logs who opened the lock and when. VaultX cannot be opened from a control center today.

Does VaultX work on a conex box?

Yes. Conex is a common name for a steel ISO shipping container, and VaultX fits all ISO containers. It mounts on the interior lashing rings, so the outside of the doors stays clear for your seal.

Is VaultX a twist lock?

No. Twist locks and corner locks hold containers to each other or to a chassis or ship. VaultX holds the container doors shut from the inside.

Sources#

See it lock a real door

Live demo on real equipment, purchase or lease options.

Request a demo

See VaultX lock a real container

Watch it installed on the lashing rings, locked and released in under five minutes.

What happens next:

  1. Send the request. It takes under a minute.
  2. VaultX gets back to you to set a time.
  3. See it installed, locked, and released on real equipment.
  4. Talk through purchase or lease options.
Prefer to talk? Call +1 (512) 749-8027 or email carlton@vaultxlock.com
What do you need to protect? (optional)
How many units? (optional)
Best way to reach you

Your details are used only to arrange your demo. Privacy policy

Call Request a demo